Video Driver For Toshiba

microsoft.public.windowsxp.general

- Previous
  - 1
    - digital audio
      Brian robertson wrote:
      
      >I have windows xp professional, i don't seem to be able
      >to transfer audio from a cd/dvd drive onto my hard drive
      >digitally, i:e i have to listen to it whilst it records
      >in analogue.
      
      In Control Panel - System - Hardware - Device Manager find the drive
      and double click. On the Properties page you need 'Enable digital CD
      audio' checked
      
      --
      Alex Nichol MS MVP (Windows Technologies)
      Bournemouth, U.K. XXXX@XXXXX.COM (remove the D8 bit)
  - 2
    - Adding a new hard drive
      Opinicus wrote:
      
      >My system's (only) hard drive is a 20 GB drive that is 80% full. This is the
      >boot drive and WinXP Home and all my software and data are installed on it.
      >(I have a USB drive that mirrors the data.)
      >
      >I'm going to add a 120 GB hard drive to the system. What's the best
      >approach? I'd like to avoid reinstalling WinXP if possible.
      
      I'd keep the system where it is, and make the 120 into a data drive. In
      Control Panel - Admin Tools - Computer Management, select Disk
      Management and look lower right for the graphic of the drive. R-click
      in Unallocated space, take Create partition. You might first consider
      whether to split it in two - say 20 for smaller files, documents and so
      on, the rest for the big ones, photos, videos, music files. Reboot
      after to make sure all is happy and letters properly assigned to the new
      partition(s)
      
      Then move data directories across - in particular open a window on
      C:\Documents and Settings\<you>\ to show your My Documents folder,
      another on the new partition, and *Right* drag across, talking *Move*
      here. You can also move the Temporary Internet files in Control Panel -
      Internet Options, click Settings and Move folder; and Outlook Expresses
      data store, in its Tools - Options - Maintenance, click Store Folder.
      
      That should leave plenty of space on C: and an efficient setup.
      
      I'd also suggest for a big partition going to System - System Restore,
      taking Settings on each drive and either disabling SR on the drive (it
      is not going to be useful on a data one as I suggest for your 120 drive)
      or at least reducing the space allowed to something under 1GB on the C:
      - the 12% it is allowed by default is really more than is good for it
      
      --
      Alex Nichol MS MVP (Windows Technologies)
      Bournemouth, U.K. XXXX@XXXXX.COM (remove the D8 bit)
  - 3
    - Is Loader.exe a legitimate program?
      I have found sites that say it is spyware. Some say it is legit.
      
      What is it?
  - 4
    - Print Screens
      Greetings --
      
      Pressing the <PrtScn> key copies the entire display to the
      clipboard. Pressing <ALT>+<PrtScn> copies only the active Window to
      the clipboard (iow, into RAM). To view the screen capture, open a
      graphics program, such as MS Paint, and press <CTRL>+V. This will
      paste the contents of the clipboard (your screenshot) into the open
      file, and allow you to view it or save it as a file for later use.
      
      How to Capture Screen Shots in Windows Using the Print Screen Key
      http://support.microsoft.com/search/preview.aspx?PR=1&scid=kb;en-us;Q173884
      
      Bruce Chambers
      
      You can have peace. Or you can have freedom. Don't ever count on
      having both at once. -- RAH
      
      "Jean" < XXXX@XXXXX.COM > wrote in message
      news:11de701c41752$568ffa90$ XXXX@XXXXX.COM ...
      >I am writting a technical document, and need to capture
      > some screen prints of an Access Application. I know how
      > to capture an image (i.e. printscrn button), however,
      > image shows everything, including the task bar on the
      > bottom. How do I get just the active window's image?
  - 5
    - Recording and playback
      
      The solution was to simply mute the microphone on the
      playback volume control. I originally thought that if I
      muted the microphone it wouldn't pick up anything. Now I
      know.
  - 6
    - How to reuse XP licence after a hard-drive formatting?
      Greetings --
      
      There's no limit to the number of times you can reinstall and
      activate the same WinXP license on the same PC. Nor is there ever a
      charge. If it's been more than 120 days since you last activated
      that specific Product Key, you'll most likely be able to activate via
      the Internet without problem. If it's been less, you might have to
      make a 5 minute phone call.
      
      Here are the facts pertaining to activation:
      
      Piracy Basics - Microsoft Product Activation
      http://www.microsoft.com/piracy/basics/activation/
      
      Windows Product Activation (WPA)
      http://www.aumha.org/a/wpa.htm
      
      Bruce Chambers
      
      You can have peace. Or you can have freedom. Don't ever count on
      having both at once. -- RAH
      
      "Sultan" < XXXX@XXXXX.COM > wrote in message
      news:11d9401c4174d$d2743bd0$ XXXX@XXXXX.COM ...
      > Hello All,
      >
      > I just installed Windows XP on one of my machines, but it
      > is still not very stable (there was a previous Win 2K
      > installation gone real bad there before). I would like to
      > re-install Win XP, but making sure this time to format the
      > HD and completely clean it up.
      >
      > How do I recover my licence key and activation so I do not
      > have to buy another copy again?
      >
      > Thanks a lot for your response.
      > Sultan

Re: Video Driver For Toshiba

by Bee » Fri, 02 Apr 2004 02:35:22 GMT

Yes, you are right, Malke. I can still login after 2 days using "driver"
and "all". And, I could not replicate how I came to the reference to that
2-day restriction. Strange! My apologies.

Bee.
--
[I have found my Shangri-La in ntlworld.]

Top

Index
- Next
  - 1
    - .DMP files
      Hi,
      see:-
      'How do I read a Windows 2000 or Windows XP Mini-Dump?'
      http://www.jsiinc.com/SUBJ/tip4900/rh4981.htm
      regards,
      ssg MS-MVP
      pronetworks.org
      
      Darryl wrote:
      
      > How do find out what problems/conflicts are causing my computer to shut down unexpectedly using the .DMP file that is created? How do I read the dump file? I have downloaded the Debugging Tools for Windows and the Symbols from Microsoft and installed them. I've tried using them to analyse the .DMP files but have no luck. Any help would be greatly appreciated!
  - 2
    - SFC /scannow keeps prompting me for the Win Xp cd rom
      I've been trying to do the SFC /scannow & it keeps prompting
      me for the Win Xp cd rom. When i insert the Xp cd rom it keeps prompting
      me for the original Win Xp cd ( which is the original). And sometimes I get
      You have Inserted the wrong CD !
      I copied the i386 folder from the XP cd and saved it on
      C:\Document and settings\Unique\i38
      
      My question is: Is it ok to Point it to C:\Document and settings\Unique\i38
      instead of CD ROM ( because I think I have problem with that) and if so
      HOW CAN I Point it to C:\Document and settings\Unique\i386
      
      any help pleae so i could finish the Scan ?
      Thank
      Fred
  - 3
    - Scripting files and settings transfer wizard
      The below article explains two program files that are named ScanState.exe
      and LoadState.exe along with four migration-rule information files that are
      named Migapp.inf, Migsys.inf, Miguser.inf, and Sysfiles.inf.
      
      321197.KB.EN-US Description of the User State Migration Tool for Windows XP
      Professional
      http://support.microsoft.com/default.aspx?scid=kb;en-us;321197
      
      Hope this helps!
      
      --
      Darren Hook
      XXXX@XXXXX.COM
      Microsoft PSS
      
      Please do not send email directly to this alias. This alias is for
      newsgroup purposes only.
      
      This posting is provided "AS IS" with no warranties, and confers no rights.
      "Dan L" < XXXX@XXXXX.COM > wrote in message
      news: XXXX@XXXXX.COM ...
      > Is there a way to automate the files and settings transfer wizard,
      > including settings and such?
      >
      > Thank you
  - 4
    - Cant view source of any site.
      When i open up a website under IE and then i go to view source nothing
      happens. Dont understand what could of caused this not to work. I have all
      of the lastest patches and service packs installed. Any suggestions on how
      to fix this.
      
      thanks
  - 5
    - CMD problem ?
      Hi,
      I have a problem , a few weeks ago I tried something I
      saw in a mag ,
      I opened the cmd prompt and gave the commands :
      scannow /sfc ,
      It then started to scan my system then told me that
      certain files needed to be copied and to insert
      my "windows XP proffesional CD SP2" , fair enough but I
      have "Windows XP Home SP1" installed ?
      
      The main problem is that yesterday I tried it and it
      tells me that the command is unrecognised so I typed in
      HELP and it gave a list of commands and SCANNOW isnt
      there ?
      
      I have also read in a mag that the command TASKLIST will
      bring up a list of tasks that are running , but this
      command isnt there either ?
      
      I have recently installed and ran a program
      called "XPLite" , does anyone know if this can disable
      these commands because it can switch off the file
      protection system so I dont know what else it can do ?
      
      Thanks.
  - 6
    - Should programs install to All Users, Default User, or Me?
      David Candy wrote:
      > Unfortunately I haven't found anything that does all users.
      >
      
      Thank you David for your replies -:)